Moscovium
Experimental chemistry • properties • laboratory science
Synthetic group-15 superheavy; very sparse direct chemical evidence.
Click a photograph for a larger view. Images are managed in the editor.
Overview & practical chemistry
Identity, occurrence, applications and measurement context from the working reference manuscript.
| Atomic number | 115 |
|---|---|
| Symbol / type | Mc · Superheavy p-block element • No measured bulk sample at room temperature • atomic mass: [288] (indicative nuclide mass number; no standard atomic weight) |
| Elemental form | No measured bulk sample | selected oxidation states Research / predicted |
| Chemical identity | Synthetic group-15 superheavy; very sparse direct chemical evidence. |
| Occurrence and production | Heavy-ion reactions. |
| Useful applications | Nuclear identification research. |
| Analytical characterization | Time/position-correlated alpha decay. |
| Research / quality note | No practical technology or bulk sample. |
| Oxidation and chemical forms | Not a routinely measured bulk property; oxidation-state reports need original experimental evidence. |
Phase transitions & temperature reference
Elemental bulk · approximately 1 atmAt approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.
| Phase at 20 °C, ~1 atm | ? |
|---|---|
| Elemental-bulk melting / freezing (near 1 atm) | ? |
| Elemental-bulk boiling / gas formation (near 1 atm) | ? |
| Sublimation (solid → gas) near 1 atm | ? |
| Additional solid–solid transitions | ? |
| Plasma onset temperature | Not a single phase boundary; ionization is density/pressure/energy dependent |
| Measurement conditions | ca. 1 atm; evaluated elemental-bulk reference only |
| Data qualification | Normal-pressure bulk melting not established in this evaluated extraction; see form-specific data. |
Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.
Allotropes & elemental forms
Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.
| Form / phase | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|
| Bulk allotropy not experimentally established | ? (elemental baseline; named form stability can differ) | ? | ? |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
Identification and structural context
| Overview | Allotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated. |
|---|---|
| Transition note | No additional independently evaluated ordinary-pressure solid–solid transition temperature is listed here. Absence of a table entry does not prove that no pressure-induced or metastable phases exist. |
| Laboratory identification | Laboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments. |
| Evidence & scope | Evidence & scope: [AL1, AL2] (no macroscopic phase dataset available). Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented. |
Selected isotopes & radioactivity
This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.
| Nuclide | Half-life | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|---|
| Mc-290 | 840 ms | ? (expected elemental chemical form, not isotope-specific observation) | ? | ? |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
Radiological exposure & interpretation
| Isotope basis | No stable nuclides; short-lived Mc isotopes. Only atom-scale research production; macroscopic touch or inhalation is not a realistic ordinary lab exposure. |
|---|---|
| External radiation — near-term | No ordinary macroscopic source or measured human acute-dose scenario. Ionizing emissions exist at atom scale; no safe distance or personal risk can be inferred. |
| External radiation — longer-term | No meaningful chronic human cohort data. An exposure assessment would require actual atoms/activity, decay products, instrument background and geometry. |
| Internal exposure — near-term | Ordinary inhalation of this element is not a credible routine scenario. No human acute inhalation-effect evidence. |
| Internal exposure — longer-term | No established chronic inhalation effects from bulk material because no bulk sample exists; theoretical radiological risk is not a clinical observation. |
| Nuclear assessment note | Radiation distance: No universal safe distance; assess isotope, activity, emitted energies, daughter products, shielding and actual dose rates. |
Isotope mass-number inventory (reference registry; not complete ENSDF): 5 recorded: 287, 288, 289, 290, 291. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.
Human effects & chemical reactions
The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.
Skin contact & inhalation
| Route & duration | Screening | Possible effects | Conditions |
|---|---|---|---|
| Skin contact — immediate | Uncertain | [GREY - unclassified] Only atom-scale, short-lived research material exists; no ordinary macroscopic contact scenario. | Route-specific interpretation only; form, concentration and duration still matter. |
| Skin contact — repeated | Uncertain | [GREY - unclassified] Only short-lived atom-scale research samples; cannot normally touch a bulk element. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — immediate | Uncertain | [GREY - unclassified] No ordinary inhalation scenario; specialized detection/containment applies. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — repeated | Uncertain | [GREY - unclassified] No human chronic data or practical macroscopic sample. | Route-specific interpretation only; form, concentration and duration still matter. |
Air & water
| Exposure | Screening | Reaction & effect | Interpretation |
|---|---|---|---|
| Air, oxygen and humidity | Uncertain | [GREY - unclassified] Moscovium has atom-by-atom chemistry studies; bulk interaction with air is not known. | Interpret together with storage, ignition and process conditions. |
| Water contact | Uncertain | [GREY - unclassified] No bulk metallic moscovium-water reaction has been measured. | Interpret together with storage, ignition and process conditions. |
Twelve additional hazard pathways
Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.
| Hazard | Screening | Possible effect | Practical context |
|---|---|---|---|
| Ingestion | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Eye exposure | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Skin absorption | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Fire and explosion | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Heating and fumes | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Chemical incompatibility | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Storage and pressure | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Bioaccumulation | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Reproductive/developmental effects | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Environmental effects | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Cryogenic effects | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
| Mechanical and pressure hazards | Uncertain | Data not established for an ordinary macroscopic elemental sample; do not extrapolate from salts or predictions. | Restricted nuclear or specialist facilities only; require authenticated isotope/form/activity and site-specific controls. CONDITION: No bulk elemental handling scenario. |
Experimental program
Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.
| Laboratory access tier | Accelerator / atom-at-a-time research — No preparable macroscopic sample; interpret qualified published observations only. |
|---|---|
| Research objective | Interpret moscovium identification evidence |
| Expected observation / output | Decay chain and recoil detection. Predetermine units, calibration basis and appropriate control. |
| Available physical form | Not a bulk specimen: recoil/decay-tagged individual atoms in a specialized facility. |
| Sample preparation & apparatus | Heavy-ion accelerator, recoil separator and alpha-decay detectors; custom calibrated event correlation. |
| Atmosphere and compatibility | No normal atmosphere or container: few-atom experiment under beamline vacuum/controlled carrier gas. |
| Production / refining context | Produced as fleeting atoms in specialized accelerator runs; “purification yield” is not bulk chemical yield. |
| Reaction, oxidation & corrosion | Only decay-tagged chemistry or transport/adsorption evidence may exist; do not infer macroscopic corrosion, electrical, or magnetic behavior. |
| Temperature, pressure & phase | Beam energy, target, separator settings and nuclide half-life are facility-specific; no bulk pressure/temperature curve. |
| Electrical / magnetic / optical measurement | Time/position-correlated alpha decay Report tracer/atom-scale inference only; never imply bulk-sample measurement. |
| Quantification & verification | No practical technology or bulk sample. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition. |
| Important experimental pitfall | No ordinary chemistry sample. |
| Teaching / research levels | School: spectra/photos/verified published data only. University: supervised nuclear-data analysis. Research: authorized atom-scale experiment. |
| Preservation & data archive | No storable bulk sample; archive detector raw data, calibration, experiment metadata and decay-chain evidence. |
Element video
A general YouTube video for this element can be added in the administration dashboard.
Measurement & verification
Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.
| Experimental access / responsibility | T5 • atom-at-a-time research; published datasets only for ordinary readers |
|---|---|
| Practical experiment question | Interpret moscovium identification evidence. |
| Measurable evidence | Decay chain and recoil detection. Nuclide identification; correlated event counts (NOT bulk chemistry). |
| Measurement pathway (candidate) | Decay-tagged accelerator/nuclide records. |
| Specimen & interpretation boundary | No ordinary chemistry sample. |
| Known failure/false conclusion | Sparse event statistics; background coincidences; identification confidence; no bulk extrapolation. |
| Evidence required BEFORE use | Facility primary papers + nuclide evaluations; avoid chemical property claims from periodic trends. |
| Important limitation | A suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work. |
| Note | Livermorium |
Sources & editorial status
Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.
Review: · Last checked: