Thorium
Experimental chemistry • properties • laboratory science
Th(IV) is predominant; strong oxide formation; thorium mineral deposits.
Click a photograph for a larger view. Images are managed in the editor.
Overview & practical chemistry
Identity, occurrence, applications and measurement context from the working reference manuscript.
| Atomic number | 90 |
|---|---|
| Symbol / type | Th · Actinide • Solid at room temperature • atomic mass: 232.038 (rounded) |
| Elemental form | Solid | selected oxidation states +4 |
| Chemical identity | Th(IV) is predominant; strong oxide formation; thorium mineral deposits. |
| Occurrence and production | Monazite, thorite and related deposits. |
| Useful applications | Research nuclear fuels, thorium dioxide and specialist high-temperature chemistry. |
| Analytical characterization | ICP-MS for Th; XRD for ThO2; radiometric assay. |
| Research / quality note | Natural Th contains daughter products after ingrowth; chemical form and activity matter. |
| Oxidation and chemical forms | Selected: +4. Values depend on compound and chemical environment. |
Phase transitions & temperature reference
Elemental bulk · approximately 1 atmAt approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.
| Phase at 20 °C, ~1 atm | Solid |
|---|---|
| Elemental-bulk melting / freezing (near 1 atm) | 2020 K (1746.85 °C) |
| Elemental-bulk boiling / gas formation (near 1 atm) | 5058 K (4784.85 °C) |
| Sublimation (solid → gas) near 1 atm | Not the stable direct phase boundary at 1 atm (melting then boiling) |
| Additional solid–solid transitions | α-Th → β-Th: 1650 K |
| Plasma onset temperature | Not a single phase boundary; ionization is density/pressure/energy dependent |
| Measurement conditions | ca. 1 atm; evaluated elemental-bulk reference only |
| Data qualification | Radioactive / scarce element: literature evaluation is not evidence of a measured isotope-specific melting point. Check sample identity, uncertainty and reference. |
Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.
Allotropes & elemental forms
Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.
| Form / phase | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|
| α-Th (fcc) | Solid (elemental baseline; named form stability can differ) | ≈2020 K(1746.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈5058 K(4784.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
| β-Th (bcc) | Solid (elemental baseline; named form stability can differ) | ≈2020 K(1746.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈5058 K(4784.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
Identification and structural context
| Overview | Allotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated. |
|---|---|
| Transition note | Selected evaluated transitions at ~1 atm (NIST TN 2312): α → β = 1650 K. These are phase boundaries, not safe heating instructions. |
| Laboratory identification | Laboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments. |
| Evidence & scope | Evidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented. |
Selected isotopes & radioactivity
This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.
| Nuclide | Half-life | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|---|
| Th-232 | ~14.05 billion y | Solid (expected elemental chemical form, not isotope-specific observation) | ≈2020 K(1746.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈5058 K(4784.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
Radiological exposure & interpretation
| Isotope basis | No stable isotopes; representative radioactive form: Th-232. Isotope, source activity and daughter products must be identified. |
|---|---|
| External radiation — near-term | External: exposure can be negligible for alpha behind intact barriers, or substantial for beta/gamma/neutrons at sufficient activity. Acute skin injury or systemic radiation illness requires high absorbed dose. Specific example: Th-232 is primarily an alpha emitter; aged material and decay products can contribute to external beta/gamma dose. |
| External radiation — longer-term | External: cumulative dose can increase later cancer/cataract/skin risks depending on organ dose, rate, and time; high-dose injury may leave chronic sequelae. |
| Internal exposure — near-term | Internal: inhaled/ingested particles, gases or intake through wounds may deliver organ dose, even without immediate symptoms. At high intake, local tissue or systemic injury is possible. Inhaled thorium-bearing dust may persist in lungs and deliver chronic alpha dose. |
| Internal exposure — longer-term | Internal: retained radionuclides may deliver committed dose over time; cancer risk or chronic organ effects depend on radiation type, retention and tissue distribution. |
| Nuclear assessment note | Radiation distance: No universal safe distance; assess isotope, activity, emitted energies, daughter products, shielding and actual dose rates. |
Isotope mass-number inventory (reference registry; not complete ENSDF): 30 recorded: 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.
Human effects & chemical reactions
The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.
Skin contact & inhalation
| Route & duration | Screening | Possible effects | Conditions |
|---|---|---|---|
| Skin contact — immediate | Low | Brief intact-metal contact may show no immediate symptoms; powders can contaminate skin or ignite. | Route-specific interpretation only; form, concentration and duration still matter. |
| Skin contact — repeated | Moderate | Intact thorium metal usually has little immediate skin effect; powder can contaminate or ignite. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — immediate | High | Thorium dust may irritate, and inhaled radionuclides can deliver internal radiation. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — repeated | Critical | Retained thorium/decay products may cause long-term lung or other organ radiation risk; assess chemistry too. | Route-specific interpretation only; form, concentration and duration still matter. |
Air & water
| Exposure | Screening | Reaction & effect | Interpretation |
|---|---|---|---|
| Air, oxygen and humidity | Moderate | Thorium metal oxidizes slowly as a bulk specimen; powder can be pyrophoric and radioactive dust hazardous. | Interpret together with storage, ignition and process conditions. |
| Water contact | Low | Bulk thorium corrodes slowly under some aqueous conditions; no generic immediate vigorous cold-water reaction. | Interpret together with storage, ignition and process conditions. |
Twelve additional hazard pathways
Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.
| Hazard | Screening | Possible effect | Practical context |
|---|---|---|---|
| Ingestion | Uncertain | Radioisotope-dependent internal exposure; chemical toxicity cannot be generalized across this element and compounds. | Radionuclide-specific intake and radiation-protection assessment. CONDITION: Specialist-only material. |
| Eye exposure | Moderate | Solid fragments, dust or filings can abrade or irritate eyes; no evidence of an ordinary corrosive effect from intact clean bulk metal. | Keep material enclosed; use splash/impact-rated eyewear when processing. CONDITION: Physical injury is not the same as systemic toxicity. |
| Skin absorption | Uncertain | Dermal systemic uptake and contamination-related radiation dose depend on isotope, skin integrity and chemical form. | Licensed contamination controls and radionuclide-specific evaluation. CONDITION: No generic safety grade. |
| Fire and explosion | Moderate | Fire behavior depends strongly on metal powders, temperature, oxygen enrichment or mixing with other chemicals. | Check SDS and combustion data before heating or making fine powders. CONDITION: Conservative screening, not proof of combustibility. |
| Heating and fumes | Uncertain | Heated radioactive material may create airborne contamination plus radionuclide-dependent external dose; no generic rating. | Licensed specialized containment and integrated radiological/chemical review. CONDITION: Depends on isotope, activity, form. |
| Chemical incompatibility | Uncertain | Compatibility is isotope/chemical-form specific; radiological contamination can make ordinary acid/oxidizer reactions hazardous. | Only approved radiochemical procedures with compatibility analysis. CONDITION: Do not infer from elemental name alone. |
| Storage and pressure | Uncertain | Sealed-source certification, activity, contamination control, gas ingrowth and decay products can govern storage; no generic safe glass arrangement. | Radiation safety officer, source registry, security and engineered containment. CONDITION: Isotope/activity and sealed status required. |
| Bioaccumulation | Uncertain | Radionuclide-specific tissue retention and internal dose may persist for years; chemistry, solubility, decay and isotope are decisive. | Internal-dose and bioassay assessment for each radionuclide; do not give a universal accumulation score. CONDITION: Radiological and chemical retention can coexist. |
| Reproductive/developmental effects | Uncertain | Reproductive/fetal exposure from radionuclides is dose-, isotope- and pregnancy-stage-dependent; no defensible generic element grade. | Radiation safety expert and pregnancy-specific workplace assessment when relevant. CONDITION: Not equivalent to chemical developmental toxicity. |
| Environmental effects | Uncertain | Environmental persistence, internal dose and hazard depend on isotope activity, chemical form, decay chain and transport pathways. | Follow radiation permits, monitored effluent and radioactive-waste management. CONDITION: No safe-disposal inference from half-life. |
| Cryogenic effects | Uncertain | No routine cryogenic elemental handling basis; if cryogenic materials are used, risks are process-specific plus radiological. | Specialist hazard analysis required. CONDITION: Unknown outside engineered research systems. |
| Mechanical and pressure hazards | Uncertain | No universal mechanical-handling grade for specialist radioactive material; engineered containment governs. | Use licensed handling system and impact-resistant containment. CONDITION: Quantity/form dependent. |
Experimental program
Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.
| Laboratory access tier | Licensed radiochemistry / nuclear facility — Isotope, activity, dose and contamination must be reviewed by radiation-protection staff. |
|---|---|
| Research objective | Compare thorium oxide materials using authorized reference specimens |
| Expected observation / output | XRD phase, isotope assay and contamination control. Predetermine units, calibration basis and appropriate control. |
| Available physical form | Authorized isotope-defined source or sealed certified reference, not unspecified “element” material. |
| Sample preparation & apparatus | Licensed shielding/containment, isotope assay, dose-rate and contamination monitoring, RSO authorization. |
| Atmosphere and compatibility | Containment selected by activity, chemical form and isotope; do not infer safe air conditions from element name. |
| Production / refining context | Production and purification are license-restricted; discuss source specification and isotope certification rather than recipes. |
| Reaction, oxidation & corrosion | Th(IV) is predominant; strong oxide formation; thorium mineral deposits. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control. |
| Temperature, pressure & phase | Activity/time, chemical form and containment drive choice; no generic heating, vacuum or pressure experiment recommended. |
| Electrical / magnetic / optical measurement | ICP-MS for Th; XRD for ThO2; radiometric assay. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds. |
| Quantification & verification | Natural Th contains daughter products after ingrowth; chemical form and activity matter. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition. |
| Important experimental pitfall | Naturally occurring Th requires radiological evaluation. |
| Teaching / research levels | School: non-contact educational spectra. University: published data/approved simulated datasets. Research: licensed isotope-specific procedures. |
| Preservation & data archive | Registered isotope-specific licensed inventory with source integrity, contamination, shielding and expiration review. |
Element video
A general YouTube video for this element can be added in the administration dashboard.
Measurement & verification
Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.
| Experimental access / responsibility | T4 • licensed radioactive-material facility; RSO approval required |
|---|---|
| Practical experiment question | Compare thorium oxide materials using authorized reference specimens. |
| Measurable evidence | XRD phase, isotope assay and contamination control. Specified radionuclide/activity or isotope ratio (not just element symbol). |
| Measurement pathway (candidate) | Licensed radiometry; isotope-specific assay; matrix chemistry where authorized. |
| Specimen & interpretation boundary | Naturally occurring Th requires radiological evaluation. |
| Known failure/false conclusion | Decay timing, progeny, chemical form, cross-contamination, spectral overlap and licensing. |
| Evidence required BEFORE use | IAEA nuclide reference + facility RSO records + isotope method/CRM [R12–R13]. |
| Important limitation | A suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work. |
| Note | Protactinium |
Sources & editorial status
Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.
Review: · Last checked: