Beryllium
Experimental chemistry • properties • laboratory science
Light, stiff metal; Be(II) and covalent bonding; forms adherent oxide layer.
Click a photograph for a larger view. Images are managed in the editor.
Overview & practical chemistry
Identity, occurrence, applications and measurement context from the working reference manuscript.
| Atomic number | 4 |
|---|---|
| Symbol / type | Be · Alkaline-earth metal • Solid at room temperature • atomic mass: 9.012 (rounded) |
| Elemental form | Solid | selected oxidation states +2 |
| Chemical identity | Light, stiff metal; Be(II) and covalent bonding; forms adherent oxide layer. |
| Occurrence and production | Beryl and bertrandite ores; complex chemical refining. |
| Useful applications | X-ray windows, precision structures and specialty alloys. |
| Analytical characterization | ICP-MS for trace Be; SEM-EDS for alloy mapping where detection permits. |
| Research / quality note | Very different from common alloys; lung sensitization makes particulate control decisive. |
| Bench properties | Approx. melting 1287 °C; density 1.85 g/cm³ near room temperature. Check phase/purity before design. |
| Oxidation and chemical forms | Selected: +2. Values depend on compound and chemical environment. |
Phase transitions & temperature reference
Elemental bulk · approximately 1 atmAt approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.
| Phase at 20 °C, ~1 atm | Solid |
|---|---|
| Elemental-bulk melting / freezing (near 1 atm) | 1556 K (1282.85 °C) |
| Elemental-bulk boiling / gas formation (near 1 atm) | 2744 K (2470.85 °C) |
| Sublimation (solid → gas) near 1 atm | Not the stable direct phase boundary at 1 atm (melting then boiling) |
| Additional solid–solid transitions | ? |
| Plasma onset temperature | Not a single phase boundary; ionization is density/pressure/energy dependent |
| Measurement conditions | ca. 1 atm; evaluated elemental-bulk reference only |
| Data qualification | NIST evaluated elemental-bulk solid–liquid transition; verify sample form and pressure. |
Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.
Allotropes & elemental forms
Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.
| Form / phase | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|
| α-Be | Solid (elemental baseline; named form stability can differ) | ≈1556 K(1282.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈2744 K(2470.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
| β-Be | Solid (elemental baseline; named form stability can differ) | ≈1556 K(1282.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈2744 K(2470.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
Identification and structural context
| Overview | Allotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated. |
|---|---|
| Transition note | Selected evaluated transitions at ~1 atm (NIST TN 2312): α → β = 1542 K. These are phase boundaries, not safe heating instructions. |
| Laboratory identification | Laboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments. |
| Evidence & scope | Evidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented. |
Selected isotopes & radioactivity
This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.
| Nuclide | Half-life | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|---|
| Be-9 | Stable; no observed radioactive decay | Solid (expected elemental chemical form, not isotope-specific observation) | ≈1556 K(1282.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈2744 K(2470.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
| Be-10 | 1.39 million y | Solid (expected elemental chemical form, not isotope-specific observation) | ≈1556 K(1282.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈2744 K(2470.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
Radiological exposure & interpretation
| Isotope basis | Common elemental specimens include stable isotopes; example *radioactive* isotope: Be-7. The BLUE entries refer ONLY to stable nuclides, not to Be-7. |
|---|---|
| External radiation — near-term | Stable nuclides emit no nuclear decay radiation; no direct radiological injury from brief contact with the stable-only material. Radioisotope-labelled material is a different case. |
| External radiation — longer-term | Stable-only material causes no cumulative ionizing dose from its own nuclei. For a radioactive isotope, long-term effects depend on measured dose; cancer risk can increase. |
| Internal exposure — near-term | Stable-only particles/gases give no internal radionuclide dose. Chemical or asphyxiation risks still apply. A radioactive isotope taken into the body can deliver organ dose. |
| Internal exposure — longer-term | Stable-only material has no radiation-driven long-term effect. Inhaled radioisotopes may be retained and increase delayed cancer risk; isotope and chemical form govern the outcome. |
Isotope mass-number inventory (reference registry; not complete ENSDF): 12 recorded: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.
Human effects & chemical reactions
The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.
Skin contact & inhalation
| Route & duration | Screening | Possible effects | Conditions |
|---|---|---|---|
| Skin contact — immediate | Moderate | Brief touch of an intact solid usually produces no immediate symptom; contaminated dust or broken skin can irritate or initiate sensitization. | Route-specific interpretation only; form, concentration and duration still matter. |
| Skin contact — repeated | High | Dust on skin can cause sensitization and dermatitis; intact solid objects release far less dust than machining. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — immediate | Critical | Dust/fume can irritate lungs and may initiate sensitization even without striking early symptoms. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — repeated | Critical | Beryllium sensitization, chronic beryllium disease and lung cancer are important occupational outcomes. | Route-specific interpretation only; form, concentration and duration still matter. |
Air & water
| Exposure | Screening | Reaction & effect | Interpretation |
|---|---|---|---|
| Air, oxygen and humidity | Moderate | Bulk beryllium forms a protective BeO layer; heated beryllium and fine particles oxidize, with hazardous dust/fume. | Interpret together with storage, ignition and process conditions. |
| Water contact | Very low | Bulk metal has no significant reaction with cold water; freshly divided material requires a separate assessment. | Interpret together with storage, ignition and process conditions. |
Twelve additional hazard pathways
Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.
| Hazard | Screening | Possible effect | Practical context |
|---|---|---|---|
| Ingestion | High | Beryllium intake must be avoided; systemic toxicity data are less robust than occupational inhalation sensitization data. | Prevent hand-to-mouth transfer and particulate spread; apply beryllium-specific hygiene controls. CONDITION: Metal versus soluble salts differ. |
| Eye exposure | Moderate | Dust or particles can irritate the eye; avoid secondary chemical contamination from soluble or oxidized forms. | Sealed samples or local capture; ANSI/EN compliant eye protection. CONDITION: Does not imply elemental solid burns the eye. |
| Skin absorption | Moderate | Repeated particulate contact can cause dermatitis or sensitization; inhalation is often a more serious exposure route. | Avoid dust on skin; use appropriate gloves and skin hygiene. CONDITION: Metal allergen and oxide-specific issues vary. |
| Fire and explosion | Moderate | Combustible-dust potential increases in finely divided or heated form; clean bulk material is generally less readily ignited. | Check actual powder combustibility; control ignition and dust. CONDITION: Conditional on particle size and process. |
| Heating and fumes | Critical | Heating/grinding beryllium can produce airborne fumes/particles causing sensitization, chronic beryllium disease and cancer. | Specialized beryllium controls and exposure verification. CONDITION: Dust/fume is critical. |
| Chemical incompatibility | Moderate | Strong acids, bases, oxidizers or halogens may corrode or transform elemental material; the reaction must be checked case by case. | Verify exact pairwise compatibility and expected evolved gases before mixing. CONDITION: Not a general permission to mix. |
| Storage and pressure | Moderate | Loose fine powder may disperse, oxidize or create combustible dust; sealed robust packaging lowers immediate risk. | Anti-spill, antistatic and particulate containment appropriate to dust and fire properties. CONDITION: Depends strongly on powder size and mass. |
| Bioaccumulation | High | Insoluble beryllium-containing particles may persist in lungs and trigger sensitization/chronic beryllium disease. | Avoid aerosol exposure and apply beryllium-specific respiratory hygiene controls. CONDITION: Pulmonary persistence, not general bloodstream accumulation. |
| Reproductive/developmental effects | Uncertain | Insufficient elemental-form evidence to classify reproductive/developmental toxicity for ordinary laboratory handling. | Consult verified CLP/GHS classification and specific SDS; do not substitute metal-compound studies. CONDITION: Unknown is grey, not green. |
| Environmental effects | Moderate | Environmental hazard depends on weathering, particle size, soluble products and ecosystem exposure; elemental identity alone is insufficient. | Collect metal residues and avoid uncontrolled discharge; consult local waste classification. CONDITION: Conservative screening. |
| Cryogenic effects | Low | Element does not ordinarily require cryogenic containment; any object chilled sufficiently can cause frostbite and sealed vessels can fail thermally. | Use cryogenic PPE and compatible temperature-rated apparatus only if process actually uses low temperature. CONDITION: No intrinsic hazard at room temperature. |
| Mechanical and pressure hazards | Low | Small intact pieces present ordinary pinch, cut and glass-breakage risks; cutting, grinding or molten handling increases injury potential. | Secure specimen and use physical guards and appropriate PPE. CONDITION: Risk depends more on specimen and task than atom number. |
Experimental program
Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.
| Laboratory access tier | Professional controlled setting — Avoid amateur generation of vapors/fumes/dust; see institutional risk assessment. |
|---|---|
| Research objective | Distinguish beryllium bulk stiffness from hazardous Be-bearing dust |
| Expected observation / output | Certified composition and mechanical-property record. Predetermine units, calibration basis and appropriate control. |
| Available physical form | Specified metal versus oxide/salt; verify surface oxide and moisture history. |
| Sample preparation & apparatus | Enclosed instrument or preprepared certified reference; exposure and waste control are prerequisites. |
| Atmosphere and compatibility | Specify air/humidity or controlled atmosphere explicitly; record oxygen, moisture and exposure time if surface changes matter. |
| Production / refining context | Context: Beryl and bertrandite ores; complex chemical refining. For teaching, use certified prepared materials; industrial extraction is not a bench recipe. |
| Reaction, oxidation & corrosion | Light, stiff metal; Be(II) and covalent bonding; forms adherent oxide layer. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control. |
| Temperature, pressure & phase | Screening context: approx. melt 1287 °C and density 1.85 g/cm³ (from Volume 2; condition-dependent). Verify by DSC/density method only if justified. |
| Electrical / magnetic / optical measurement | ICP-MS for trace Be; SEM-EDS for alloy mapping where detection permits. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds. |
| Quantification & verification | Very different from common alloys; lung sensitization makes particulate control decisive. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition. |
| Important experimental pitfall | Avoid generating Be dust; only specialist containment and authorization. |
| Teaching / research levels | School: safe surrogate/sample image only. University: certified standards and enclosed instrumentation. Research: approved element-specific protocol. |
| Preservation & data archive | Certified containment and segregated inventory with contamination monitoring and disposal protocol. |
Element video
A general YouTube video for this element can be added in the administration dashboard.
Measurement & verification
Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.
| Experimental access / responsibility | T3 • specialized controlled professional facility; no open handling |
|---|---|
| Practical experiment question | Distinguish beryllium bulk stiffness from hazardous Be-bearing dust. |
| Measurable evidence | Certified composition and mechanical-property record. Trace/major element concentration in specified matrix. |
| Measurement pathway (candidate) | Certified solid or solution CRM by ICP-MS/XRF as matrix permits. |
| Specimen & interpretation boundary | Avoid generating Be dust; only specialist containment and authorization. |
| Known failure/false conclusion | Sample heterogeneity, contamination, oxidation, geometry/matrix effects and inadequate calibration range. |
| Evidence required BEFORE use | Matrix-matched SRM/CRM + method scope + validation or local verification [R02,R05,R07–R10]. |
| Important limitation | A suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work. |
| Note | Boron |
Sources & editorial status
Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.
Review: · Last checked: