ELEMENT 017 / HALOGEN
17ClATOMIC NUMBER · SYMBOL

Chlorine

Experimental chemistry • properties • laboratory science

Cl2 oxidant; chloride is stable common anion; chlorination reactions vary by substrate.

Atomic no. 17HalogenGas at room conditions
Explore profile
IMAGE PLACEHOLDERClReal element images to be added later

Click a photograph for a larger view. Images are managed in the editor.

01
The essentials

Overview & practical chemistry

Identity, occurrence, applications and measurement context from the working reference manuscript.

Atomic number17
Symbol / typeCl · Halogen • Gas at room temperature • atomic mass: 35.453 (rounded)
Elemental formGas | selected oxidation states -1,+1,+5
Chemical identityCl2 oxidant; chloride is stable common anion; chlorination reactions vary by substrate.
Occurrence and productionElectrolysis of brine in chlor-alkali industry.
Useful applicationsWater treatment and chemical synthesis; PVC production uses chlorine-derived feedstocks.
Analytical characterizationIon chromatography for chloride; colorimetry for free/total chlorine; online gas detection.
Research / quality noteChlorine gas, chloride salt and hypochlorite have different properties.
Oxidation and chemical formsSelected: -1 / +1 / +5. Values depend on compound and chemical environment.

Phase transitions & temperature reference

Elemental bulk · approximately 1 atm

At approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.

Phase at 20 °C, ~1 atmGas
Elemental-bulk melting / freezing (near 1 atm)172.2 K (-100.95 °C)
Elemental-bulk boiling / gas formation (near 1 atm)239.11 K (-34.04 °C)
Sublimation (solid → gas) near 1 atmNot the stable direct phase boundary at 1 atm (melting then boiling)
Additional solid–solid transitions?
Plasma onset temperatureNot a single phase boundary; ionization is density/pressure/energy dependent
Measurement conditionsca. 1 atm; evaluated elemental-bulk reference only
Data qualificationNIST evaluated elemental-bulk solid–liquid transition; verify sample form and pressure.

Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.

02
Structure matters

Allotropes & elemental forms

Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.

Form / phaseState at 20 °CMelting / transitionBoiling / sublimation
Documented ordinary/reference formGas (elemental baseline; named form stability can differ)≈172.2 K(-100.95 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈239.11 K(-34.04 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Elemental chlorine is molecular Cl2; the low-temperature molecular solid does not represent a different ordinary chemical allotrope. LAB: Consult the physical state and source specimen conditions; do not infer another allotrope from oxidation, impurities, phase of matter, particle size, or magnetic ordering alone.
Approximate solid / liquid / gas ranges
Bulk/form-comparator melting ~172.2 K; generic gas reference ~239.11 K. NOT a phase range for this named form; it can transform or exist only under special pressure.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
~1 atm elemental baseline. This particular structural form can transform, sublime or decompose before the listed bulk transition.
Evidence level
ELEMENTAL/OTHER-FORM REFERENCE only — NOT this form’s measurement
Phase data source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Identification and structural context
OverviewAllotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated.
Transition noteNo additional independently evaluated ordinary-pressure solid–solid transition temperature is listed here. Absence of a table entry does not prove that no pressure-induced or metastable phases exist.
Laboratory identificationLaboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments.
Evidence & scopeEvidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented.
03
Nuclear science

Selected isotopes & radioactivity

This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.

NuclideHalf-lifeState at 20 °CMelting / transitionBoiling / sublimation
Cl-35Stable; no observed radioactive decayGas (expected elemental chemical form, not isotope-specific observation)≈172.2 K(-100.95 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈239.11 K(-34.04 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Stable nuclide; verify current NNDC evaluation
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~172.2 K; liquid between ~172.2 and ~239.11 K; gas above ~239.11 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Cl-36301,000 yGas (expected elemental chemical form, not isotope-specific observation)≈172.2 K(-100.95 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈239.11 K(-34.04 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
beta-
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~172.2 K; liquid between ~172.2 and ~239.11 K; gas above ~239.11 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Cl-37Stable; no observed radioactive decayGas (expected elemental chemical form, not isotope-specific observation)≈172.2 K(-100.95 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈239.11 K(-34.04 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Stable nuclide; verify current NNDC evaluation
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~172.2 K; liquid between ~172.2 and ~239.11 K; gas above ~239.11 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Radiological exposure & interpretation
Isotope basisCommon elemental specimens include stable isotopes; example *radioactive* isotope: Cl-36. The BLUE entries refer ONLY to stable nuclides, not to Cl-36.
External radiation — near-termStable nuclides emit no nuclear decay radiation; no direct radiological injury from brief contact with the stable-only material. Radioisotope-labelled material is a different case.
External radiation — longer-termStable-only material causes no cumulative ionizing dose from its own nuclei. For a radioactive isotope, long-term effects depend on measured dose; cancer risk can increase.
Internal exposure — near-termStable-only particles/gases give no internal radionuclide dose. Chemical or asphyxiation risks still apply. A radioactive isotope taken into the body can deliver organ dose.
Internal exposure — longer-termStable-only material has no radiation-driven long-term effect. Inhaled radioisotopes may be retained and increase delayed cancer risk; isotope and chemical form govern the outcome.

Isotope mass-number inventory (reference registry; not complete ENSDF): 24 recorded: 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.

04
Separate exposure routes

Human effects & chemical reactions

The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.

Skin contact & inhalation

Route & durationScreeningPossible effectsConditions
Skin contact — immediateCriticalGas or liquid causes corrosive irritation/burns.Route-specific interpretation only; form, concentration and duration still matter.
Skin contact — repeatedCriticalCorrosive burns can heal with scarring; repeated low-level vapor exposure irritates skin and mucosa.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — immediateCriticalChlorine gas can cause coughing, choking and delayed pulmonary edema.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — repeatedCriticalRepeated chlorine exposure or severe single episodes may leave persistent airway hyperreactivity.Route-specific interpretation only; form, concentration and duration still matter.

Air & water

ExposureScreeningReaction & effectInterpretation
Air, oxygen and humidityCriticalChlorine is a reactive oxidizing gas; in humid air it forms irritating/corrosive species; does not simply remain harmless as it disperses.Interpret together with storage, ignition and process conditions.
Water contactCriticalChlorine dissolves and partly hydrolyzes in water to hydrochloric acid and hypochlorous acid; the mixture is corrosive.Interpret together with storage, ignition and process conditions.
05
Beyond direct exposure

Twelve additional hazard pathways

Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.

HazardScreeningPossible effectPractical context
IngestionCriticalCorrosive elemental halogen causes severe mouth, throat and gastrointestinal tissue injury; associated inhalation may dominate for gases.Use a closed compatible system; emergency response and immediate medical evaluation for exposure. CONDITION: F2/Cl2 gases; Br2 volatile liquid.
Eye exposureCriticalElemental halogen vapor or liquid can cause severe eye irritation/corrosive damage, potentially permanent vision injury.Closed equipment plus splash/face protection and accessible eyewash; emergency medical care. CONDITION: Gas or liquid form makes exposure rapid.
Skin absorptionCriticalHalogen exposure can cause serious chemical burns on skin; penetration/uptake depends on compound formed and exposure.Prevent gas/liquid contact; suitable rated protective barriers and emergency showers. CONDITION: Corrosive effect may dominate absorption.
Fire and explosionHighElemental halogen is not normally flammable but is oxidizing/reactive and can intensify or cause fire with incompatible materials.Strict segregation from fuels, reducers and reactive metals. CONDITION: Not an ordinary combustible fuel.
Heating and fumesCriticalHeating increases volatilization of corrosive halogen or vapor and raises risks of severe eye/airway injury.Closed temperature-rated corrosion-resistant system. CONDITION: F2/Cl2 gases, Br2 liquid, I2 solid.
Chemical incompatibilityCriticalStrong oxidizing halogen reacts with metals, reducers, organics and many other incompatible materials; corrosive gases may form.Chemical compatibility matrix for every contacted seal, reagent and exhaust path. CONDITION: Reagent-specific severity.
Storage and pressureCriticalCompressed or liquefied gas vessels may rupture, leak, displace oxygen or generate rapid cold expansion; reactive gases add toxicity/fire.Use compliant rated cylinders, restraint, compatible regulators, relief devices, ventilation and leak planning. CONDITION: A small unpressurized room-temperature amount is different.
BioaccumulationUncertainNo reliable general claim about long-term tissue accumulation can be made for every form of this element.Check chemical species, particulate size, bioavailability and toxicokinetics. CONDITION: Absence of evidence is not evidence of no retention.
Reproductive/developmental effectsUncertainInsufficient elemental-form evidence to classify reproductive/developmental toxicity for ordinary laboratory handling.Consult verified CLP/GHS classification and specific SDS; do not substitute metal-compound studies. CONDITION: Unknown is grey, not green.
Environmental effectsCriticalHalogen gas/liquid releases can injure plants and aquatic life or form harmful reactive products in water/air.Prevent vented releases; compatible scrubbing and waste capture by trained staff. CONDITION: Chemical release, not radiological.
Cryogenic effectsModerateRefrigerated or molten/solid form may cause thermal injury; corrosive halogen exposure remains the main hazard.Control cold/hot handling and corrosion-resistant containment. CONDITION: Not necessarily below conventional cryogenic temperature.
Mechanical and pressure hazardsHighHigh-pressure gas jets/cylinder failure can injure or propel fragments; liquid gases add cold-burn risk.Secure cylinders, approved regulators, guards and release controls. CONDITION: Physical pressure hazard is independent of gas toxicity.
06
From questions to evidence

Experimental program

Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.

Laboratory access tierProfessional controlled setting — Avoid amateur generation of vapors/fumes/dust; see institutional risk assessment.
Research objectiveDetermine chlorine chemistry through a certified chloride reference
Expected observation / outputIon chromatography and recovery. Predetermine units, calibration basis and appropriate control.
Available physical formCertified gas in engineered system or factory-sealed optical reference cell, not a loose solid.
Sample preparation & apparatusApproved gas manifold, pressure regulator, gas purity sensor and leak checks; check oxygen-deficiency risk.
Atmosphere and compatibilityKnown gas composition, temperature, regulator condition and chamber pressure; monitor oxygen displacement where relevant.
Production / refining contextContext: Electrolysis of brine in chlor-alkali industry. For teaching, use certified prepared materials; industrial extraction is not a bench recipe.
Reaction, oxidation & corrosionCl2 oxidant; chloride is stable common anion; chlorination reactions vary by substrate. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control.
Temperature, pressure & phaseUse regulated pressure/temperature ranges supplied by certified equipment; record flow and gas composition.
Electrical / magnetic / optical measurementIon chromatography for chloride; colorimetry for free/total chlorine; online gas detection. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds.
Quantification & verificationChlorine gas, chloride salt and hypochlorite have different properties. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition.
Important experimental pitfallChloride salts are not a substitute for elemental Cl2 hazard evaluation.
Teaching / research levelsSchool: safe surrogate/sample image only. University: certified standards and enclosed instrumentation. Research: approved element-specific protocol.
Preservation & data archiveApproved cylinder or sealed reference cell, correct segregation, securement and leak checks; no improvised storage.
07
See the science

Element video

Video coming soon

A general YouTube video for this element can be added in the administration dashboard.

08
Reproducible work

Measurement & verification

Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.

Experimental access / responsibilityT3 • specialized controlled professional facility; no open handling
Practical experiment questionDetermine chlorine chemistry through a certified chloride reference.
Measurable evidenceIon chromatography and recovery. Halide concentration, NOT free halogen element.
Measurement pathway (candidate)Certified halide standard; IC or appropriate species-selective method.
Specimen & interpretation boundaryChloride salts are not a substitute for elemental Cl2 hazard evaluation.
Known failure/false conclusionLeaks, carrier gas purity, pressure, adsorption and detector background; O2 deficiency where relevant.
Evidence required BEFORE useCertified gas/reference lamp certificates + traceable calibration [R11].
Important limitationA suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work.
NoteArgon
09
Evidence and revision

Sources & editorial status

Scientific review pending

Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.

Review: · Last checked: