Iodine
Experimental chemistry • properties • laboratory science
I2 sublimates; I(-I)/I(+I,+V) chemistry and thyroid-specific biological relevance.
Click a photograph for a larger view. Images are managed in the editor.
Overview & practical chemistry
Identity, occurrence, applications and measurement context from the working reference manuscript.
| Atomic number | 53 |
|---|---|
| Symbol / type | I · Halogen • Solid at room temperature • atomic mass: 126.904 (rounded) |
| Elemental form | Solid | selected oxidation states -1,+1,+5 |
| Chemical identity | I2 sublimates; I(-I)/I(+I,+V) chemistry and thyroid-specific biological relevance. |
| Occurrence and production | Iodide brines and seawater resources; oxidized to iodine. |
| Useful applications | Iodinated contrast/media compounds, disinfection and pharmaceutical synthesis. |
| Analytical characterization | Ion chromatography for iodide/iodate; ICP-MS for total iodine. |
| Research / quality note | I2 vapor, iodide in diet and radioactive I-131 require separate consideration. |
| Bench properties | Approx. melting 113.7 °C; density 4.93 g/cm³ near room temperature. Check phase/purity before design. |
| Oxidation and chemical forms | Selected: -1 / +1 / +5. Values depend on compound and chemical environment. |
Phase transitions & temperature reference
Elemental bulk · approximately 1 atmAt approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.
| Phase at 20 °C, ~1 atm | Solid |
|---|---|
| Elemental-bulk melting / freezing (near 1 atm) | 386.8 K (113.65 °C) |
| Elemental-bulk boiling / gas formation (near 1 atm) | 457.4 K (184.25 °C) |
| Sublimation (solid → gas) near 1 atm | Not the stable direct phase boundary at 1 atm (melting then boiling) |
| Additional solid–solid transitions | ? |
| Plasma onset temperature | Not a single phase boundary; ionization is density/pressure/energy dependent |
| Measurement conditions | ca. 1 atm; evaluated elemental-bulk reference only |
| Data qualification | NIST evaluated elemental-bulk solid–liquid transition; verify sample form and pressure. Boiling value comes from a secondary table and remains provisional until primary-source review. |
Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.
Allotropes & elemental forms
Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.
| Form / phase | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|
| Documented ordinary/reference form | Solid (elemental baseline; named form stability can differ) | ≈386.8 K(113.65 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈457.4 K(184.25 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
Identification and structural context
| Overview | Allotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated. |
|---|---|
| Transition note | No additional independently evaluated ordinary-pressure solid–solid transition temperature is listed here. Absence of a table entry does not prove that no pressure-induced or metastable phases exist. |
| Laboratory identification | Laboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments. |
| Evidence & scope | Evidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented. |
Selected isotopes & radioactivity
This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.
| Nuclide | Half-life | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|---|
| I-125 | 59.4 d | Solid (expected elemental chemical form, not isotope-specific observation) | ≈386.8 K(113.65 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈457.4 K(184.25 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
| I-127 | Half-life/status not independently verified here | Solid (expected elemental chemical form, not isotope-specific observation) | ≈386.8 K(113.65 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈457.4 K(184.25 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
| I-131 | 8.02 d | Solid (expected elemental chemical form, not isotope-specific observation) | ≈386.8 K(113.65 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈457.4 K(184.25 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
Radiological exposure & interpretation
| Isotope basis | Common elemental specimens include stable isotopes; example *radioactive* isotope: I-131. The BLUE entries refer ONLY to stable nuclides, not to I-131. |
|---|---|
| External radiation — near-term | Stable nuclides emit no nuclear decay radiation; no direct radiological injury from brief contact with the stable-only material. Radioisotope-labelled material is a different case. Specific example: I-131 emits beta and gamma radiation; accessible high-activity material can give external dose. |
| External radiation — longer-term | Stable-only material causes no cumulative ionizing dose from its own nuclei. For a radioactive isotope, long-term effects depend on measured dose; cancer risk can increase. |
| Internal exposure — near-term | Stable-only particles/gases give no internal radionuclide dose. Chemical or asphyxiation risks still apply. A radioactive isotope taken into the body can deliver organ dose. Radioiodine may accumulate in the thyroid and deliver a concentrated internal dose; late thyroid risk is a key concern. |
| Internal exposure — longer-term | Stable-only material has no radiation-driven long-term effect. Inhaled radioisotopes may be retained and increase delayed cancer risk; isotope and chemical form govern the outcome. |
Isotope mass-number inventory (reference registry; not complete ENSDF): 37 recorded: 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.
Human effects & chemical reactions
The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.
Skin contact & inhalation
| Route & duration | Screening | Possible effects | Conditions |
|---|---|---|---|
| Skin contact — immediate | High | Elemental iodine can stain and irritate skin; prolonged contact may produce chemical burns. | Route-specific interpretation only; form, concentration and duration still matter. |
| Skin contact — repeated | High | Repeated iodine contact can cause dermatitis; absorbed iodine from exposures may affect thyroid function. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — immediate | Critical | Iodine vapor causes burning throat, cough and irritation. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — repeated | Critical | Prolonged excess iodine exposure can alter thyroid function; radioactive iodine adds thyroid radiation dose. | Route-specific interpretation only; form, concentration and duration still matter. |
Air & water
| Exposure | Screening | Reaction & effect | Interpretation |
|---|---|---|---|
| Air, oxygen and humidity | High | Iodine slowly sublimates into a colored, irritating vapor even at room temperature; oxidizing reactivity depends on materials. | Interpret together with storage, ignition and process conditions. |
| Water contact | Low | Slightly soluble in pure water with weak hydrolysis; iodine solutions remain irritating and oxidizing. | Interpret together with storage, ignition and process conditions. |
Twelve additional hazard pathways
Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.
| Hazard | Screening | Possible effect | Practical context |
|---|---|---|---|
| Ingestion | High | Elemental iodine crystals/vapor can irritate or injure mucosa and cause systemic iodine-related effects after significant intake. | Prevent access to crystals, dust and vapors; use controlled handling and exposure-specific medical review. CONDITION: Different from nutritional iodide intake. |
| Eye exposure | High | Elemental iodine crystals, dust or vapor can cause eye irritation and potentially significant damage. | Enclose vapors and prevent crystal/dust release; eye protection and eyewash. CONDITION: Molecular iodine, not iodide. |
| Skin absorption | Moderate | Iodine crystals/contact can irritate and stain skin; absorption may contribute to thyroid effects with significant repeated exposure. | Prevent iodine vapor/crystal contact; gloves assessed for compatibility. CONDITION: Iodine compounds have different exposure properties. |
| Fire and explosion | Moderate | Fire behavior depends strongly on metal powders, temperature, oxygen enrichment or mixing with other chemicals. | Check SDS and combustion data before heating or making fine powders. CONDITION: Conservative screening, not proof of combustibility. |
| Heating and fumes | Critical | Heating increases volatilization of corrosive halogen or vapor and raises risks of severe eye/airway injury. | Closed temperature-rated corrosion-resistant system. CONDITION: F2/Cl2 gases, Br2 liquid, I2 solid. |
| Chemical incompatibility | Moderate | Strong acids, bases, oxidizers or halogens may corrode or transform elemental material; the reaction must be checked case by case. | Verify exact pairwise compatibility and expected evolved gases before mixing. CONDITION: Not a general permission to mix. |
| Storage and pressure | Moderate | Iodine sublimation/vapor can escape poorly sealed jars, contaminating cabinet surfaces and irritating eyes/airways. | Use validated chemical-compatible vapor-tight packaging and secondary enclosure. CONDITION: At ambient temperature iodine can volatilize. |
| Bioaccumulation | Uncertain | No reliable general claim about long-term tissue accumulation can be made for every form of this element. | Check chemical species, particulate size, bioavailability and toxicokinetics. CONDITION: Absence of evidence is not evidence of no retention. |
| Reproductive/developmental effects | Uncertain | Insufficient elemental-form evidence to classify reproductive/developmental toxicity for ordinary laboratory handling. | Consult verified CLP/GHS classification and specific SDS; do not substitute metal-compound studies. CONDITION: Unknown is grey, not green. |
| Environmental effects | Critical | Halogen gas/liquid releases can injure plants and aquatic life or form harmful reactive products in water/air. | Prevent vented releases; compatible scrubbing and waste capture by trained staff. CONDITION: Chemical release, not radiological. |
| Cryogenic effects | Moderate | Refrigerated or molten/solid form may cause thermal injury; corrosive halogen exposure remains the main hazard. | Control cold/hot handling and corrosion-resistant containment. CONDITION: Not necessarily below conventional cryogenic temperature. |
| Mechanical and pressure hazards | Low | Small intact pieces present ordinary pinch, cut and glass-breakage risks; cutting, grinding or molten handling increases injury potential. | Secure specimen and use physical guards and appropriate PPE. CONDITION: Risk depends more on specimen and task than atom number. |
Experimental program
Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.
| Laboratory access tier | Professional controlled setting — Avoid amateur generation of vapors/fumes/dust; see institutional risk assessment. |
|---|---|
| Research objective | Measure iodine in a certified iodide specimen via spectroscopy |
| Expected observation / output | UV–Vis or ion assay. Predetermine units, calibration basis and appropriate control. |
| Available physical form | Specified bulk elemental specimen, thin film, certified alloy or reference matrix; never silently substitute a compound. |
| Sample preparation & apparatus | Enclosed instrument or preprepared certified reference; exposure and waste control are prerequisites. |
| Atmosphere and compatibility | Specify air/humidity or controlled atmosphere explicitly; record oxygen, moisture and exposure time if surface changes matter. |
| Production / refining context | Context: Iodide brines and seawater resources; oxidized to iodine. For teaching, use certified prepared materials; industrial extraction is not a bench recipe. |
| Reaction, oxidation & corrosion | I2 sublimates; I(-I)/I(+I,+V) chemistry and thyroid-specific biological relevance. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control. |
| Temperature, pressure & phase | Screening context: approx. melt 113.7 °C and density 4.93 g/cm³ (from Volume 2; condition-dependent). Verify by DSC/density method only if justified. |
| Electrical / magnetic / optical measurement | Ion chromatography for iodide/iodate; ICP-MS for total iodine. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds. |
| Quantification & verification | I2 vapor, iodide in diet and radioactive I-131 require separate consideration. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition. |
| Important experimental pitfall | Elemental I2 vapor hazard differs from iodide. |
| Teaching / research levels | School: safe surrogate/sample image only. University: certified standards and enclosed instrumentation. Research: approved element-specific protocol. |
| Preservation & data archive | Certified containment and segregated inventory with contamination monitoring and disposal protocol. |
Element video
A general YouTube video for this element can be added in the administration dashboard.
Measurement & verification
Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.
| Experimental access / responsibility | T1/T2 • supervised accessible specimen when form-specific risk assessment permits |
|---|---|
| Practical experiment question | Measure iodine in a certified iodide specimen via spectroscopy. |
| Measurable evidence | UV–Vis or ion assay. Halide concentration, NOT free halogen element. |
| Measurement pathway (candidate) | Certified halide standard; IC or appropriate species-selective method. |
| Specimen & interpretation boundary | Elemental I2 vapor hazard differs from iodide. |
| Known failure/false conclusion | Halide species versus element, volatilization, container interaction and reagent blanks. |
| Evidence required BEFORE use | Matrix-matched SRM/CRM + method scope + validation or local verification [R02,R05,R07–R10]. |
| Important limitation | A suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work. |
| Note | Xenon |
Sources & editorial status
Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.
Review: · Last checked: