ELEMENT 080 / TRANSITION METAL
80HgATOMIC NUMBER · SYMBOL

Mercury

Experimental chemistry • properties • laboratory science

Only common liquid elemental metal near room temperature; readily forms amalgams and volatile vapor.

Atomic no. 80Transition metalLiquid at room conditions
Explore profile
IMAGE PLACEHOLDERHgReal element images to be added later

Click a photograph for a larger view. Images are managed in the editor.

01
The essentials

Overview & practical chemistry

Identity, occurrence, applications and measurement context from the working reference manuscript.

Atomic number80
Symbol / typeHg · Transition metal • Liquid at room temperature • atomic mass: 200.590 (rounded)
Elemental formLiquid | selected oxidation states +1,+2
Chemical identityOnly common liquid elemental metal near room temperature; readily forms amalgams and volatile vapor.
Occurrence and productionMainly cinnabar processing historically; now recovery/recycling emphasized.
Useful applicationsLegacy instruments, electrochemistry research and specialty industrial uses.
Analytical characterizationCold-vapor atomic absorption/fluorescence for Hg; vapor monitoring.
Research / quality noteMetallic Hg vapor, soluble mercury salts and methylmercury are distinct exposure forms.
Bench propertiesApprox. melting -38.8 °C; density 13.53 g/cm³ near room temperature. Check phase/purity before design.
Oxidation and chemical formsSelected: +1 / +2. Values depend on compound and chemical environment.

Phase transitions & temperature reference

Elemental bulk · approximately 1 atm

At approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.

Phase at 20 °C, ~1 atmLiquid
Elemental-bulk melting / freezing (near 1 atm)234.321 K (-38.83 °C)
Elemental-bulk boiling / gas formation (near 1 atm)629.88 K (356.73 °C)
Sublimation (solid → gas) near 1 atmNot the stable direct phase boundary at 1 atm (melting then boiling)
Additional solid–solid transitions?
Plasma onset temperatureNot a single phase boundary; ionization is density/pressure/energy dependent
Measurement conditionsca. 1 atm; evaluated elemental-bulk reference only
Data qualificationNIST evaluated elemental-bulk solid–liquid transition; verify sample form and pressure. Boiling value comes from a secondary table and remains provisional until primary-source review.

Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.

02
Structure matters

Allotropes & elemental forms

Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.

Form / phaseState at 20 °CMelting / transitionBoiling / sublimation
Documented ordinary/reference formLiquid (elemental baseline; named form stability can differ)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Solid mercury is rhombohedral near its freezing point; additional compressed crystal forms have been reported. LAB: Consult the physical state and source specimen conditions; do not infer another allotrope from oxidation, impurities, phase of matter, particle size, or magnetic ordering alone.
Approximate solid / liquid / gas ranges
Bulk/form-comparator melting ~234.321 K; generic gas reference ~629.88 K. NOT a phase range for this named form; it can transform or exist only under special pressure.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
~1 atm elemental baseline. This particular structural form can transform, sublime or decompose before the listed bulk transition.
Evidence level
ELEMENTAL/OTHER-FORM REFERENCE only — NOT this form’s measurement
Phase data source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Identification and structural context
OverviewAllotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated.
Transition noteNo additional independently evaluated ordinary-pressure solid–solid transition temperature is listed here. Absence of a table entry does not prove that no pressure-induced or metastable phases exist.
Laboratory identificationLaboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments.
Evidence & scopeEvidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented.
03
Nuclear science

Selected isotopes & radioactivity

This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.

NuclideHalf-lifeState at 20 °CMelting / transitionBoiling / sublimation
Hg-196Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-198Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-199Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-200Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-201Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-202Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-20346.6 dLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
beta-/gamma
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Hypothetical/macroscopic sample not feasible for this nuclide. Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Hg-204Half-life/status not independently verified hereLiquid (expected elemental chemical form, not isotope-specific observation)≈234.321 K(-38.83 °C) (elemental-reference proxy, NOT specific to this isotope/form)≈629.88 K(356.73 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Consult NNDC NuDat / IUPAC IPTEI before citing
Approximate solid / liquid / gas ranges
Elemental-reference ranges ONLY, not proven for this isotope at ~1 atm: solid below ~234.321 K; liquid between ~234.321 and ~629.88 K; gas above ~629.88 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Radiological exposure & interpretation
Isotope basisCommon elemental specimens include stable isotopes; example *radioactive* isotope: Hg-203. The BLUE entries refer ONLY to stable nuclides, not to Hg-203.
External radiation — near-termStable nuclides emit no nuclear decay radiation; no direct radiological injury from brief contact with the stable-only material. Radioisotope-labelled material is a different case.
External radiation — longer-termStable-only material causes no cumulative ionizing dose from its own nuclei. For a radioactive isotope, long-term effects depend on measured dose; cancer risk can increase.
Internal exposure — near-termStable-only particles/gases give no internal radionuclide dose. Chemical or asphyxiation risks still apply. A radioactive isotope taken into the body can deliver organ dose.
Internal exposure — longer-termStable-only material has no radiation-driven long-term effect. Inhaled radioisotopes may be retained and increase delayed cancer risk; isotope and chemical form govern the outcome.

Isotope mass-number inventory (reference registry; not complete ENSDF): 40 recorded: 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.

04
Separate exposure routes

Human effects & chemical reactions

The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.

Skin contact & inhalation

Route & durationScreeningPossible effectsConditions
Skin contact — immediateLowLiquid elemental mercury may not immediately burn intact skin, but it can spread contamination and generate toxic vapor.Route-specific interpretation only; form, concentration and duration still matter.
Skin contact — repeatedLowRepeated contact with liquid mercury contaminates surfaces; skin reactions are less central than vapor exposure.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — immediateCriticalMercury vapor is inhaled at room temperature; higher exposures may cause cough, pneumonitis or delayed lung injury.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — repeatedCriticalLong-term vapor exposure can injure nervous system and kidneys and cause tremor, mood/cognitive changes.Route-specific interpretation only; form, concentration and duration still matter.

Air & water

ExposureScreeningReaction & effectInterpretation
Air, oxygen and humidityCriticalElemental mercury slowly evaporates at room temperature; hazardous vapor can accumulate despite little obvious oxidation.Interpret together with storage, ignition and process conditions.
Water contactVery lowLiquid mercury does not react chemically with pure water and is poorly soluble; droplets may spread and contaminate surfaces.Interpret together with storage, ignition and process conditions.
05
Beyond direct exposure

Twelve additional hazard pathways

Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.

HazardScreeningPossible effectPractical context
IngestionLowMetallic Hg swallowed as liquid is relatively poorly absorbed by an intact gastrointestinal tract, unlike inhaled Hg vapor; aspiration or retained droplets are dangerous.Never ingest; prevent spills and hand-to-mouth transfer; mercury-vapor and spill plan. CONDITION: Elemental liquid only, not mercuric salts or methylmercury.
Eye exposureLowMercury droplets or contaminated particulates may irritate the eye; the major chronic concern is Hg vapor rather than direct ocular corrosion.Prevent droplets, aerosols and vapor; control breakage/spill risk. CONDITION: Elemental Hg only.
Skin absorptionLowAbsorption through intact skin of elemental liquid mercury is limited relative to vapor inhalation, but skin contamination is unacceptable.Avoid skin contact and vapor; spill controls; do not equate elemental Hg with organomercury compounds. CONDITION: Elemental mercury, intact skin.
Fire and explosionLowNo usual bulk-element ignition hazard at ambient conditions; other fire hazards from powders or neighboring reagents remain.Keep away from incompatible reactive chemicals; ensure standard fire protection. CONDITION: Common bulk form.
Heating and fumesCriticalHeating liquid mercury dramatically increases toxic mercury-vapor generation and potential neurologic/kidney injury.Do not heat in open vessels; certified containment, vapor monitoring and spill planning. CONDITION: Elemental Hg is volatile even at room temperature.
Chemical incompatibilityHighMercury forms amalgams with some metals and can compromise certain metal parts; strong oxidizers and reactive chemicals add hazards.Use mercury-compatible containment and secondary trays; avoid incompatible metals. CONDITION: Not all common solids are safe containment materials.
Storage and pressureCriticalA broken elemental mercury vessel releases persistent liquid droplets and toxic vapor; small spills are difficult to remove.Verified leak-tight secondary containment and mercury spill plan; avoid fragile display vessels. CONDITION: Ambient vapor occurs without heating.
BioaccumulationHighElemental Hg vapor is absorbed and can accumulate in tissues; environmental methylmercury biomagnification is a DIFFERENT chemical species.Prevent Hg vapor and spills; distinguish elemental Hg from methylmercury. CONDITION: Do not claim elemental mercury metal itself biomagnifies like methylmercury.
Reproductive/developmental effectsCriticalExposure to elemental Hg vapor may harm the nervous system; fetal/developmental effects depend on form and dose. Methylmercury has distinct, better-characterized developmental risks.Prevent vapor exposure and distinguish Hg(0) from organic mercury species. CONDITION: Do not combine mercury forms into one exposure estimate.
Environmental effectsCriticalMercury releases can spread in air/soil/water; microorganisms can convert mercury into methylmercury, which bioaccumulates in aquatic food webs.Never drain-dispose; mercury-specific containment, recovery and hazardous waste pathway. CONDITION: Elemental Hg transforms environmentally; species must be distinguished.
Cryogenic effectsLowA frozen or very cold sample can cause cold-contact injury; Hg chemical toxicity remains a separate hazard.Avoid bare contact with cold/contaminated objects. CONDITION: No routine cryogenic application.
Mechanical and pressure hazardsModerateLiquid droplets spread after vessel breakage; glass shards and persistent contamination complicate safe cleanup.Robust leak-tight secondary containment; do not use fragile open displayware. CONDITION: Chemical and physical hazards overlap.
06
From questions to evidence

Experimental program

Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.

Laboratory access tierProfessional controlled setting — Avoid amateur generation of vapors/fumes/dust; see institutional risk assessment.
Research objectiveAssess mercury content in approved reference materials
Expected observation / outputCold-vapor atomic spectroscopy and recovery. Predetermine units, calibration basis and appropriate control.
Available physical formCertified sealed specimen or approved reference material; vapor containment is critical.
Sample preparation & apparatusEnclosed instrument or preprepared certified reference; exposure and waste control are prerequisites.
Atmosphere and compatibilitySpecify air/humidity or controlled atmosphere explicitly; record oxygen, moisture and exposure time if surface changes matter.
Production / refining contextContext: Mainly cinnabar processing historically; now recovery/recycling emphasized. For teaching, use certified prepared materials; industrial extraction is not a bench recipe.
Reaction, oxidation & corrosionOnly common liquid elemental metal near room temperature; readily forms amalgams and volatile vapor. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control.
Temperature, pressure & phaseMaintain documented temperature and vapor containment; melting/evaporation tests require specialist review.
Electrical / magnetic / optical measurementCold-vapor atomic absorption/fluorescence for Hg; vapor monitoring. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds.
Quantification & verificationMetallic Hg vapor, soluble mercury salts and methylmercury are distinct exposure forms. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition.
Important experimental pitfallMetal vapor and compounds require different exposure assessment.
Teaching / research levelsSchool: safe surrogate/sample image only. University: certified standards and enclosed instrumentation. Research: approved element-specific protocol.
Preservation & data archiveApproved tight container with secondary containment, vapor control and material compatibility verification.
07
See the science

Element video

Video coming soon

A general YouTube video for this element can be added in the administration dashboard.

08
Reproducible work

Measurement & verification

Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.

Experimental access / responsibilityT3 • specialized controlled professional facility; no open handling
Practical experiment questionAssess mercury content in approved reference materials.
Measurable evidenceCold-vapor atomic spectroscopy and recovery. Total mercury in validated matrix; ambient Hg vapor as separate measurand.
Measurement pathway (candidate)Professionally controlled cold-vapor atomic absorption/fluorescence.
Specimen & interpretation boundaryMetal vapor and compounds require different exposure assessment.
Known failure/false conclusionVapor loss, adsorption, amalgamation, reagent blanks and species distinctions.
Evidence required BEFORE useMatrix-matched SRM/CRM + method scope + validation or local verification [R02,R05,R07–R10].
Important limitationA suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work.
NoteThallium
09
Evidence and revision

Sources & editorial status

Scientific review pending

Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.

Review: · Last checked: