Rubidium
Experimental chemistry • properties • laboratory science
Very reactive alkali metal; Rb(I), useful atomic transitions.
Click a photograph for a larger view. Images are managed in the editor.
Overview & practical chemistry
Identity, occurrence, applications and measurement context from the working reference manuscript.
| Atomic number | 37 |
|---|---|
| Symbol / type | Rb · Alkali metal • Solid at room temperature • atomic mass: 85.468 (rounded) |
| Elemental form | Solid | selected oxidation states +1 |
| Chemical identity | Very reactive alkali metal; Rb(I), useful atomic transitions. |
| Occurrence and production | Minor component of lithium/cesium minerals; separated by ion exchange. |
| Useful applications | Atomic clocks, research magnetometry and photocathodes. |
| Analytical characterization | ICP-MS for Rb; laser spectroscopy for vapor-cell diagnostics. |
| Research / quality note | Scientific use often involves sealed vapor cells, not handling bulk Rb. |
| Bench properties | Approx. melting 39.3 °C; density 1.53 g/cm³ near room temperature. Check phase/purity before design. |
| Oxidation and chemical forms | Selected: +1. Values depend on compound and chemical environment. |
Phase transitions & temperature reference
Elemental bulk · approximately 1 atmAt approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.
| Phase at 20 °C, ~1 atm | Solid |
|---|---|
| Elemental-bulk melting / freezing (near 1 atm) | 312.46 K (39.31 °C) |
| Elemental-bulk boiling / gas formation (near 1 atm) | 961 K (687.85 °C) |
| Sublimation (solid → gas) near 1 atm | Not the stable direct phase boundary at 1 atm (melting then boiling) |
| Additional solid–solid transitions | ? |
| Plasma onset temperature | Not a single phase boundary; ionization is density/pressure/energy dependent |
| Measurement conditions | ca. 1 atm; evaluated elemental-bulk reference only |
| Data qualification | NIST evaluated elemental-bulk solid–liquid transition; verify sample form and pressure. Boiling value comes from a secondary table and remains provisional until primary-source review. |
Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.
Allotropes & elemental forms
Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.
| Form / phase | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|
| Documented ordinary/reference form | Solid (elemental baseline; named form stability can differ) | ≈312.46 K(39.31 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈961 K(687.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | |||
Identification and structural context
| Overview | Allotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated. |
|---|---|
| Transition note | No additional independently evaluated ordinary-pressure solid–solid transition temperature is listed here. Absence of a table entry does not prove that no pressure-induced or metastable phases exist. |
| Laboratory identification | Laboratory identification: compare diffraction or phase-sensitive spectroscopy to reliable standards under recorded pressure, temperature and specimen composition. The described forms do not authorize hazardous synthesis or high-pressure experiments. |
| Evidence & scope | Evidence & scope: [AL1, AL2, AL3, AL5]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented. |
Selected isotopes & radioactivity
This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.
| Nuclide | Half-life | State at 20 °C | Melting / transition | Boiling / sublimation |
|---|---|---|---|---|
| Rb-85 | Half-life/status not independently verified here | Solid (expected elemental chemical form, not isotope-specific observation) | ≈312.46 K(39.31 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈961 K(687.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
| Rb-87 | 49.7 billion y | Solid (expected elemental chemical form, not isotope-specific observation) | ≈312.46 K(39.31 °C) (elemental-reference proxy, NOT specific to this isotope/form) | ≈961 K(687.85 °C) (elemental-reference proxy, NOT specific to this isotope/form) |
Full record, evidence, conditions & photographs
Photographs No photograph added yet. | ||||
Radiological exposure & interpretation
| Isotope basis | Naturally occurring material may contain low-activity radionuclide(s); example Rb-87. Many laboratory-enriched/activated forms are different. |
|---|---|
| External radiation — near-term | Typical small natural-composition samples are not expected to cause prompt external radiation injury; this is NOT a clearance for concentrated or activated material. Specific example: Rb-87 occurs naturally at low specific activity; ordinary samples are not equivalent to concentrated sources. |
| External radiation — longer-term | Cumulative external dose is usually low for ordinary samples but may need assessment for unusual amounts or radioisotope-enriched materials. |
| Internal exposure — near-term | Natural radionuclides may enter the body with dust, gases or soluble materials. Immediate radiologic symptoms are not expected at background-level intake; chemical toxicity may be separate. Internal intake follows rubidium chemistry, with dose depending on activity and retention. |
| Internal exposure — longer-term | Radiation-induced effects depend on committed organ dose and retention, not merely the element name; higher intakes can increase long-term cancer risk. |
| Nuclear assessment note | NUCLEAR STATUS: Naturally occurring radioisotopes are known or may have extremely long decay half-lives. Never infer “stable” solely from natural abundance. |
Isotope mass-number inventory (reference registry; not complete ENSDF): 32 recorded: 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.
Human effects & chemical reactions
The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.
Skin contact & inhalation
| Route & duration | Screening | Possible effects | Conditions |
|---|---|---|---|
| Skin contact — immediate | Critical | Metal burns on moist skin. | Route-specific interpretation only; form, concentration and duration still matter. |
| Skin contact — repeated | Critical | Repeated skin contact causes chemical burns; sensitization is not the principal concern. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — immediate | High | Rubidium dust or smoke reacts with airway moisture, causing corrosive irritation. | Route-specific interpretation only; form, concentration and duration still matter. |
| Inhalation — repeated | High | Repeated caustic inhalation exposure can produce chronic airway injury; routine unprotected handling inappropriate. | Route-specific interpretation only; form, concentration and duration still matter. |
Air & water
| Exposure | Screening | Reaction & effect | Interpretation |
|---|---|---|---|
| Air, oxygen and humidity | Critical | Rubidium oxidizes/ignites readily on air/moisture exposure, especially when freshly cut. | Interpret together with storage, ignition and process conditions. |
| Water contact | Critical | Violently reacts with water, producing rubidium hydroxide, H2 and heat; fire/explosion hazard. | Interpret together with storage, ignition and process conditions. |
Twelve additional hazard pathways
Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.
| Hazard | Screening | Possible effect | Practical context |
|---|---|---|---|
| Ingestion | Critical | Metal reacts with saliva/body water, generating heat, caustic hydroxide and hydrogen; chemical burns can be severe. | Absolutely prevent ingestion; use inert storage and qualified chemical procedures. CONDITION: Actual severity depends on amount and metal. |
| Eye exposure | Critical | Reactive metal particles plus eye moisture can generate caustic hydroxide and heat, causing serious burns. | Sealed or inert manipulation by trained staff; high-quality face protection and medical response. CONDITION: Strongly form-dependent. |
| Skin absorption | Critical | Water on skin reacts with reactive metal and generates heat and strong alkali, causing burns rather than requiring transdermal absorption. | No bare skin contact; moisture exclusion and emergency planning. CONDITION: Physical chemical reaction, not systemic skin uptake. |
| Fire and explosion | Critical | Reactive metal can ignite after contact with moisture/air; hydrogen generation can trigger fire or explosion. | Inert or approved moisture-excluding storage, trained users and a suitable metal-fire plan. CONDITION: Larger pieces differ from dust; Rb/Cs particularly reactive. |
| Heating and fumes | Critical | Heating highly reactive metal can cause ignition and severe fire/caustic injuries. | Inert atmosphere and purpose-built controlled apparatus only. CONDITION: Temperature/moisture dependent. |
| Chemical incompatibility | Critical | Strong incompatibility with water, moist air, acids and many oxidizers; hydrogen, caustic alkali, heat and fire can result. | Segregate by written compatibility plan; exclude incompatible extinguishing agents and chemicals. CONDITION: Elemental alkali metal, not its salts or ions. |
| Storage and pressure | Critical | Air/moisture exposure, failed seals or unsuitable storage liquids can cause heat, hydrogen and ignition. | Dry compatible inert enclosure and designated segregated storage; inspect seals. CONDITION: Rb/Cs require especially careful moisture exclusion. |
| Bioaccumulation | Uncertain | No reliable general claim about long-term tissue accumulation can be made for every form of this element. | Check chemical species, particulate size, bioavailability and toxicokinetics. CONDITION: Absence of evidence is not evidence of no retention. |
| Reproductive/developmental effects | Uncertain | Insufficient elemental-form evidence to classify reproductive/developmental toxicity for ordinary laboratory handling. | Consult verified CLP/GHS classification and specific SDS; do not substitute metal-compound studies. CONDITION: Unknown is grey, not green. |
| Environmental effects | High | Metal spilled into water can generate alkaline solution, heat and hydrogen; acute local aquatic injury and fire risk are possible. | Avoid drains, waterways and wet waste; trained hazardous-waste response. CONDITION: Impact varies with spill mass/dilution. |
| Cryogenic effects | Low | Element does not ordinarily require cryogenic containment; any object chilled sufficiently can cause frostbite and sealed vessels can fail thermally. | Use cryogenic PPE and compatible temperature-rated apparatus only if process actually uses low temperature. CONDITION: No intrinsic hazard at room temperature. |
| Mechanical and pressure hazards | Moderate | Soft reactive metal may deform; accidental cutting/contact with moist tools adds chemical/fire hazard. | Trained tool use and protected inert handling. CONDITION: Physical handling can trigger chemical reaction. |
Experimental program
Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.
| Laboratory access tier | Trained controlled atmosphere — Avoid unreviewed demonstrations involving elemental reactive metal. |
|---|---|
| Research objective | Study rubidium vapor spectra using certified sealed cells |
| Expected observation / output | Atomic absorption spectrum and temperature log. Predetermine units, calibration basis and appropriate control. |
| Available physical form | Professionally sealed elemental specimen; do not confuse with much safer salt standards. |
| Sample preparation & apparatus | Compatible sealed sample holders with reviewed inert/dry conditions and oxygen/moisture monitoring as applicable. |
| Atmosphere and compatibility | Dry inert atmosphere may be essential for bulk elemental specimens; validate oxygen/water levels; no open-air metal handling. |
| Production / refining context | Occurrence/production context: Minor component of lithium/cesium minerals; separated by ion exchange. Compare supply grade, supplier CoA and measured composition before choosing a refining route. |
| Reaction, oxidation & corrosion | Very reactive alkali metal; Rb(I), useful atomic transitions. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control. |
| Temperature, pressure & phase | Screening context: approx. melt 39.3 °C and density 1.53 g/cm³ (from Volume 2; condition-dependent). Verify by DSC/density method only if justified. |
| Electrical / magnetic / optical measurement | ICP-MS for Rb; laser spectroscopy for vapor-cell diagnostics. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds. |
| Quantification & verification | Scientific use often involves sealed vapor cells, not handling bulk Rb. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition. |
| Important experimental pitfall | Vapor cells are engineered systems; not open-bench alkali metal. |
| Teaching / research levels | School: safe surrogate/sample image only. University: certified standards and enclosed instrumentation. Research: approved element-specific protocol. |
| Preservation & data archive | Only manufacturer/institution-approved sealed dry containment under expert-controlled storage; check packaging integrity. |
Element video
A general YouTube video for this element can be added in the administration dashboard.
Measurement & verification
Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.
| Experimental access / responsibility | T3 • controlled atmosphere and trained staff for elemental specimen |
|---|---|
| Practical experiment question | Study rubidium vapor spectra using certified sealed cells. |
| Measurable evidence | Atomic absorption spectrum and temperature log. Total element content; a salt assay does NOT prove elemental-metal purity. |
| Measurement pathway (candidate) | ICP-OES/ICP-MS on certified salt/alloy matrix; sealed optical cell if appropriate. |
| Specimen & interpretation boundary | Vapor cells are engineered systems; not open-bench alkali metal. |
| Known failure/false conclusion | Oxide/moisture growth on elemental surface; seals, contamination and oxidation during transfer. |
| Evidence required BEFORE use | Matrix-matched SRM/CRM + method scope + validation or local verification [R02,R05,R07–R10]. |
| Important limitation | A suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work. |
| Note | Strontium |
Sources & editorial status
Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.
Review: · Last checked: