ELEMENT 015 / NONMETAL
15PATOMIC NUMBER · SYMBOL

Phosphorus

Experimental chemistry • properties • laboratory science

Multiple allotropes; P(V)/P(III) oxoacids and phosphates; phosphorus chemistry is redox-sensitive.

Atomic no. 15NonmetalSolid at room conditions
Explore profile
IMAGE PLACEHOLDERPReal element images to be added later

Click a photograph for a larger view. Images are managed in the editor.

01
The essentials

Overview & practical chemistry

Identity, occurrence, applications and measurement context from the working reference manuscript.

Atomic number15
Symbol / typeP · Nonmetal • Solid at room temperature • atomic mass: 30.974 (rounded)
Elemental formSolid | selected oxidation states -3,+3,+5
Chemical identityMultiple allotropes; P(V)/P(III) oxoacids and phosphates; phosphorus chemistry is redox-sensitive.
Occurrence and productionPhosphate rock reduced industrially for elemental phosphorus; phosphate fertilizers from acid processing.
Useful applicationsFertilizers (phosphate compounds), flame retardants and semiconductor dopants.
Analytical characterizationICP-OES/ICP-MS for total P; ion chromatography for phosphate; 31P NMR for speciation.
Research / quality noteWhite phosphorus is substantially different from red phosphorus and stable phosphates.
Oxidation and chemical formsSelected: -3 / +3 / +5. Values depend on compound and chemical environment.

Phase transitions & temperature reference

Elemental bulk · approximately 1 atm

At approximately 1 atm, bulk values depend on specimen, isotope mixture and phase. When specific measurements or published theoretical estimates exist, they are labeled. A value borrowed from a normal element is only a reference proxy. Plasma is an ionized state, without a single universal onset temperature.

Phase at 20 °C, ~1 atmSolid
Elemental-bulk melting / freezing (near 1 atm)317.3 K (44.15 °C) (white molecular phosphorus (P4) ONLY; not universal bulk element melting)
Elemental-bulk boiling / gas formation (near 1 atm)553.65 K (280.50 °C)
Sublimation (solid → gas) near 1 atm?
Additional solid–solid transitionsRed-P forms: see form-specific entries; Black-P transition: see form-specific entries
Plasma onset temperatureNot a single phase boundary; ionization is density/pressure/energy dependent
Measurement conditionsca. 1 atm; evaluated elemental-bulk reference only
Data qualificationPhosphorus: multiple allotropes with different measured transitions; see form-specific table.

Solid-phase reference: NIST Technical Note 2312 (2025). Boiling data: PubChem (NIH) where checked, otherwise secondary tabulation (provisional). Additional tabulated elemental values were cross-checked with the Royal Society of Chemistry. Where one exists, the named-form reference is not a universally applicable transition. Values can be form-dependent, metastable, estimated or pressure-dependent; verify against original reports for laboratory use.

02
Structure matters

Allotropes & elemental forms

Values are distinguished as form-specific measurements, theoretical predictions, or ELEMENTAL REFERENCE proxies. A numerical proxy describes the natural-element reference, not a measured melting/boiling point of that named form. ? remains where no defensible value or proxy exists.

Form / phaseState at 20 °CMelting / transitionBoiling / sublimation
White phosphorus P4: α, β, γ molecular crystalsSolid (form dependent)α-white P: 317.28 K; β/γ: ? (phase-specific)553.7 K(P₄, normal boiling)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Molecular tetrahedral P4, with several documented crystal packings; white-P is very reactive. LAB: Color names alone do not specify α/β/γ white crystal forms.
Approximate solid / liquid / gas ranges
Reference for ONE named form only, not all isotopes/allotropes at ~1 atm: solid below ~317.3 K; liquid between ~317.3 and ~553.7 K; gas above ~553.7 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
Pressure and thermal history required; phase at 20 °C does not imply the named polymorph is stable
Evidence level
Measured crystalline form and molecular liquid/vapor
Phase data source
https://periodic-table.rsc.org/element/15/phosphorus
Photographs

No photograph added yet.

Amorphous red phosphorusSolid (form dependent)Red P (III) → violet red P ~833 ± 10 K; other red forms transform differently (not a single amorphous melting point)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Disordered polymeric/network red form, not a single periodic crystal. LAB: Purity, conversion state and morphology strongly affect reactivity.
Approximate solid / liquid / gas ranges
This named form changes structure before or around fusion; no single general solid/liquid/gas range. See form-specific transitions and conditions.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
NIST solid–solid transformation; red phosphorus form/history dependent
Evidence level
Related NIST red-P phase reference, not a general amorphous melting temperature
Phase data source
https://www.nist.gov/publications/phase-transition-temperatures-solid-elements-atmospheric-pressure
Photographs

No photograph added yet.

Crystalline red phosphorus polymorphs II and IIISolid (form dependent)Red P (III) → violet red P ~833 ± 10 K (form III reported)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Distinct reported red-P crystal structures. LAB: Index crystal phase by diffraction, not color alone.
Approximate solid / liquid / gas ranges
This named form changes structure before or around fusion; no single general solid/liquid/gas range. See form-specific transitions and conditions.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
Pressure and thermal history required; phase at 20 °C does not imply the named polymorph is stable
Evidence level
NIST phase transition for red-P III; not necessarily II
Phase data source
https://www.nist.gov/publications/phase-transition-temperatures-solid-elements-atmospheric-pressure
Photographs

No photograph added yet.

Fibrous red phosphorus (type IV)Solid (form dependent)Fibrous red P → violet red P ~848 K (NIST reported)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Chain/tube-like crystalline red allotrope. LAB: Different from violet/red bulk varieties; verify XRD/Raman.
Approximate solid / liquid / gas ranges
This named form changes structure before or around fusion; no single general solid/liquid/gas range. See form-specific transitions and conditions.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
Pressure and thermal history required; phase at 20 °C does not imply the named polymorph is stable
Evidence level
NIST reported fibrous red-P transition
Phase data source
https://www.nist.gov/publications/phase-transition-temperatures-solid-elements-atmospheric-pressure
Photographs

No photograph added yet.

Violet phosphorus (Hittorf; red type V)Solid (form dependent)≈317.3 K(44.15 °C) (white molecular phosphorus (P4) FORM reference; NOT isotope-specific or applicable to every allotrope)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Distinct crystalline violet/red phosphorus. LAB: Structure-dependent photoelectric and electronic properties.
Approximate solid / liquid / gas ranges
Bulk/form-comparator melting ~317.3 K; generic gas reference ~553.65 K. NOT a phase range for this named form; it can transform or exist only under special pressure.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
Pressure and thermal history required; phase at 20 °C does not imply the named polymorph is stable
Evidence level
ELEMENTAL/OTHER-FORM REFERENCE only — NOT this form’s measurement
Phase data source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Black phosphorus (orthorhombic A17)Solid (form dependent)~880 ± 15 K(black P → liquid, reported); black → red ~870 K (reported)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Layered puckered solid; black-P exfoliation gives phosphorene sheets. LAB: Sensitive to oxidation in thin layers; diffraction/Raman useful.
Approximate solid / liquid / gas ranges
This named form changes structure before or around fusion; no single general solid/liquid/gas range. See form-specific transitions and conditions.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
Pressure and thermal history required; phase at 20 °C does not imply the named polymorph is stable
Evidence level
NIST black-P high-T form transition and melting
Phase data source
https://www.nist.gov/publications/phase-transition-temperatures-solid-elements-atmospheric-pressure
Photographs

No photograph added yet.

Compressed black-P forms (rhombohedral A7; pseudo-simple-cubic / simple-cubic)Solid (elemental baseline; named form stability can differ)≈317.3 K(44.15 °C) (white molecular phosphorus (P4) FORM reference; NOT isotope-specific or applicable to every allotrope)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Structure, conditions & interpretation
Pressure-driven polymorphs observed at several GPa and above. LAB: Not retained as normal ambient bulk allotropes in routine labs. [AL2,AL3,AL6]
Approximate solid / liquid / gas ranges
Bulk/form-comparator melting ~317.3 K; generic gas reference ~553.65 K. NOT a phase range for this named form; it can transform or exist only under special pressure.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Phase conditions
~1 atm elemental baseline. This particular structural form can transform, sublime or decompose before the listed bulk transition.
Evidence level
ELEMENTAL/OTHER-FORM REFERENCE only — NOT this form’s measurement
Phase data source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Identification and structural context
Named forms noted in chapterMultiple allotropes; P(V)/P(III) oxoacids and phosphates; phosphorus chemistry is redox-sensitive.
OverviewAllotropy describes structurally different forms made of the same element. Distinguish genuine allotropes from melting/freezing, impurities, compounds, isotopes, size-dependent surface effects and magnetic transitions. “Normal” below means approximately 1 atm unless another pressure is stated.
Transition noteSelected evaluated transitions at ~1 atm (NIST TN 2312): white α melting = 317.28 K. These are phase boundaries, not safe heating instructions.
Laboratory identificationLaboratory identification: use phase-specific powder/single-crystal XRD, Raman or other appropriate spectroscopy, with documented temperature, pressure, composition, impurities, substrate and thermal history. A color or appearance alone is insufficient.
Evidence & scopeEvidence & scope: [AL2, AL3, AL6, AL16]. Lists cover established principal named forms and notable experimentally reported polymorphs; an absolutely exhaustive list of all high-pressure, ultrathin, transient, metastable or newly discovered structures is not scientifically fixed. If data are unavailable, this is recorded rather than invented.
03
Nuclear science

Selected isotopes & radioactivity

This is a selected isotope list, not all known nuclides. Exact isotope-specific results are used where documented; elsewhere numerical elemental references are shown only as proxies, never as measurements or calculated isotope-specific estimates. Very short-lived isotopes cannot practically be collected in bulk. Plasma has no universal onset temperature.

NuclideHalf-lifeState at 20 °CMelting / transitionBoiling / sublimation
P-31Stable; no observed radioactive decaySolid (expected elemental chemical form, not isotope-specific observation)≈317.3 K(44.15 °C) (white molecular phosphorus (P4) FORM reference; NOT isotope-specific or applicable to every allotrope)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
Stable nuclide; verify current NNDC evaluation
Approximate solid / liquid / gas ranges
Reference for ONE named form only, not all isotopes/allotropes at ~1 atm: solid below ~317.3 K; liquid between ~317.3 and ~553.65 K; gas above ~553.65 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

P-3214.27 dSolid (expected elemental chemical form, not isotope-specific observation)≈317.3 K(44.15 °C) (white molecular phosphorus (P4) FORM reference; NOT isotope-specific or applicable to every allotrope)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
beta-
Approximate solid / liquid / gas ranges
Reference for ONE named form only, not all isotopes/allotropes at ~1 atm: solid below ~317.3 K; liquid between ~317.3 and ~553.65 K; gas above ~553.65 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Hypothetical/macroscopic sample not feasible for this nuclide. Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

P-3325.34 dSolid (expected elemental chemical form, not isotope-specific observation)≈317.3 K(44.15 °C) (white molecular phosphorus (P4) FORM reference; NOT isotope-specific or applicable to every allotrope)≈553.65 K(280.50 °C) (elemental-reference proxy, NOT specific to this isotope/form)
Full record, evidence, conditions & photographs
Decay or evidence note
beta-
Approximate solid / liquid / gas ranges
Reference for ONE named form only, not all isotopes/allotropes at ~1 atm: solid below ~317.3 K; liquid between ~317.3 and ~553.65 K; gas above ~553.65 K. Not a plasma threshold.
Plasma onset
Not a fixed temperature — ionization depends on density, pressure and energy input
Pressure / sample conditions
Hypothetical/macroscopic sample not feasible for this nuclide. Pure isotope values can differ from natural-element mixture; ~1 atm reference; the elemental form and isotopic enrichment must be specified.
Evidence level
ELEMENTAL/FORM REFERENCE only — NOT an isotope measurement
Isotope phase source
https://nvlpubs.nist.gov/nistpubs/TechnicalNotes/NIST.TN.2312.pdf
Photographs

No photograph added yet.

Radiological exposure & interpretation
Isotope basisCommon elemental specimens include stable isotopes; example *radioactive* isotope: P-32. The BLUE entries refer ONLY to stable nuclides, not to P-32.
External radiation — near-termStable nuclides emit no nuclear decay radiation; no direct radiological injury from brief contact with the stable-only material. Radioisotope-labelled material is a different case. Specific example: P-32 is an energetic beta emitter; an exposed source can produce localized skin or eye dose.
External radiation — longer-termStable-only material causes no cumulative ionizing dose from its own nuclei. For a radioactive isotope, long-term effects depend on measured dose; cancer risk can increase.
Internal exposure — near-termStable-only particles/gases give no internal radionuclide dose. Chemical or asphyxiation risks still apply. A radioactive isotope taken into the body can deliver organ dose. If inhaled or ingested, phosphorus-labelled material can irradiate internal tissues.
Internal exposure — longer-termStable-only material has no radiation-driven long-term effect. Inhaled radioisotopes may be retained and increase delayed cancer risk; isotope and chemical form govern the outcome.

Isotope mass-number inventory (reference registry; not complete ENSDF): 23 recorded: 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46. • The nuclide examples are selected reference entries from Volume 1, not an evaluated inventory of every isotope. Original half-life/status data require current nuclear-database checks. Distance alone cannot establish a safe dose.

04
Separate exposure routes

Human effects & chemical reactions

The colored chips are inherited qualitative editorial screening labels, not GHS classifications, measured dose thresholds or permissions to touch or breathe any substance.

Skin contact & inhalation

Route & durationScreeningPossible effectsConditions
Skin contact — immediateCriticalWhite phosphorus severe burns; red phosphorus less reactive.Route-specific interpretation only; form, concentration and duration still matter.
Skin contact — repeatedCriticalWhite phosphorus can produce deep burns, scarring and systemic poisoning; red phosphorus differs substantially.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — immediateCriticalWhite-phosphorus vapors/fire smoke can cause severe airway irritation and potentially delayed lung injury.Route-specific interpretation only; form, concentration and duration still matter.
Inhalation — repeatedCriticalRepeated white-phosphorus exposure can cause serious systemic and bone effects; allotrope/oxidation products determine risk.Route-specific interpretation only; form, concentration and duration still matter.

Air & water

ExposureScreeningReaction & effectInterpretation
Air, oxygen and humidityCriticalWhite phosphorus can oxidize and ignite on exposure to air; red phosphorus is substantially less reactive but fine dust may ignite.Interpret together with storage, ignition and process conditions.
Water contactLowElemental phosphorus is essentially water-insoluble; water is used to isolate white phosphorus from oxygen, not to neutralize it.Interpret together with storage, ignition and process conditions.
05
Beyond direct exposure

Twelve additional hazard pathways

Ingestion, ocular contact, pressure, fire, heat, incompatibilities, bioaccumulation and other relevant laboratory pathways.

HazardScreeningPossible effectPractical context
IngestionCriticalWhite/yellow phosphorus ingestion can produce severe gastrointestinal injury and systemic liver, kidney and cardiac toxicity. Red phosphorus differs.No student handling of white P; obtain immediate poison-centre/medical assessment after suspected ingestion. CONDITION: Allotrope-dependent.
Eye exposureCriticalWhite phosphorus can ignite on contact with air and cause severe ocular thermal/chemical burns.Specialist handling only; emergency protocol and immediate medical treatment. CONDITION: White versus red phosphorus.
Skin absorptionCriticalWhite phosphorus burns can allow significant systemic absorption and organ injury; red phosphorus is less reactive.Specialist control and emergency protocol; no open student contact. CONDITION: Allotrope dependent.
Fire and explosionCriticalWhite phosphorus can spontaneously ignite in air; red phosphorus and other allotropes behave differently.Use specialized storage/procedures; never improvise with school-lab samples. CONDITION: Allotrope matters.
Heating and fumesCriticalWhite phosphorus may ignite; hot phosphorus can burn and form irritating/toxic oxide fumes.No open-air heating; allotrope-specific controls. CONDITION: White and red phosphorus differ.
Chemical incompatibilityCriticalWhite phosphorus is incompatible with oxidizers and air; may ignite and produce toxic smoke.Allotrope-specific storage and segregation; specialist controls. CONDITION: Do not apply white-P rules automatically to red P.
Storage and pressureCriticalWhite phosphorus can ignite if unsuitable storage permits exposure to air; some forms require specialized storage conditions.Specialist allotrope-specific controls and inspection; no school collection of white P. CONDITION: Red phosphorus is distinctly less air-reactive.
BioaccumulationUncertainNo reliable general claim about long-term tissue accumulation can be made for every form of this element.Check chemical species, particulate size, bioavailability and toxicokinetics. CONDITION: Absence of evidence is not evidence of no retention.
Reproductive/developmental effectsUncertainInsufficient elemental-form evidence to classify reproductive/developmental toxicity for ordinary laboratory handling.Consult verified CLP/GHS classification and specific SDS; do not substitute metal-compound studies. CONDITION: Unknown is grey, not green.
Environmental effectsModerateEnvironmental hazard depends on weathering, particle size, soluble products and ecosystem exposure; elemental identity alone is insufficient.Collect metal residues and avoid uncontrolled discharge; consult local waste classification. CONDITION: Conservative screening.
Cryogenic effectsLowElement does not ordinarily require cryogenic containment; any object chilled sufficiently can cause frostbite and sealed vessels can fail thermally.Use cryogenic PPE and compatible temperature-rated apparatus only if process actually uses low temperature. CONDITION: No intrinsic hazard at room temperature.
Mechanical and pressure hazardsLowSmall intact pieces present ordinary pinch, cut and glass-breakage risks; cutting, grinding or molten handling increases injury potential.Secure specimen and use physical guards and appropriate PPE. CONDITION: Risk depends more on specimen and task than atom number.
06
From questions to evidence

Experimental program

Candidate investigation plans requiring qualified supervision and method-specific review before laboratory use.

Laboratory access tierSchool observation to professional testing — Handling only if local assessment deems the chosen form, quantity and method appropriate.
Research objectiveIdentify phosphorus allotrope and oxidation state in a certified specimen
Expected observation / outputRaman, XRD, P assay. Predetermine units, calibration basis and appropriate control.
Available physical formSpecified bulk elemental specimen, thin film, certified alloy or reference matrix; never silently substitute a compound.
Sample preparation & apparatusClean sample mount and correctly calibrated method selected from the target observable; confirm holder compatibility.
Atmosphere and compatibilitySpecify air/humidity or controlled atmosphere explicitly; record oxygen, moisture and exposure time if surface changes matter.
Production / refining contextOccurrence/production context: Phosphate rock reduced industrially for elemental phosphorus; phosphate fertilizers from acid processing. Compare supply grade, supplier CoA and measured composition before choosing a refining route.
Reaction, oxidation & corrosionMultiple allotropes; P(V)/P(III) oxoacids and phosphates; phosphorus chemistry is redox-sensitive. For a reaction or corrosion claim, state the exact phase, reagent, concentration, surface finish and time; compare blank/control.
Temperature, pressure & phaseSelect temperature/pressure only after phase and hazard review; do not assume handbook values for unknown allotropes.
Electrical / magnetic / optical measurementICP-OES/ICP-MS for total P; ion chromatography for phosphate; 31P NMR for speciation. Confirm the method measures the actual specified elemental form; several listed techniques characterize derivatives or compounds.
Quantification & verificationWhite phosphorus is substantially different from red phosphorus and stable phosphates. Record lot/CoA, preparation, blanks, calibration, replicate results, uncertainty and waste disposition.
Important experimental pitfallWhite and red phosphorus have profoundly different handling requirements.
Teaching / research levelsSchool: teacher-approved observation or safe comparison. University: quantitative method with controls. Research: advanced instrument and uncertainty study.
Preservation & data archiveUse labeled chemically compatible sealed storage; document surface condition, humidity, atmosphere and any change since measurement.
07
See the science

Element video

Video coming soon

A general YouTube video for this element can be added in the administration dashboard.

08
Reproducible work

Measurement & verification

Choose a method appropriate to the specimen and measurand, then document calibration, controls, uncertainty and interpretation limits.

Experimental access / responsibilityT1/T2 • supervised accessible specimen when form-specific risk assessment permits
Practical experiment questionIdentify phosphorus allotrope and oxidation state in a certified specimen.
Measurable evidenceRaman, XRD, P assay. Phase/allotrope plus total content when necessary.
Measurement pathway (candidate)Raman/XRD plus elemental assay on suitable certified form.
Specimen & interpretation boundaryWhite and red phosphorus have profoundly different handling requirements.
Known failure/false conclusionSample heterogeneity, contamination, oxidation, geometry/matrix effects and inadequate calibration range.
Evidence required BEFORE useMatrix-matched SRM/CRM + method scope + validation or local verification [R02,R05,R07–R10].
Important limitationA suggested technique is not a validated SOP. Verify exact specimen, measurand, method scope, calibration, blanks, control materials, uncertainty, operator competence and applicable institutional approvals before work.
NoteSulfur
09
Evidence and revision

Sources & editorial status

Scientific review pending

Imported from the prepublication chemistry manuscript. Claim-level scientific review and direct source mapping are not complete. Do not rely on the screening assessments for laboratory safety decisions.

Review: · Last checked: